GLASS EPOXY G10 SHEET
G10/FR-4 is widely used as an insulator for electrical and electronic applications. Glass/epoxy composite material with outstanding electrical properties.
Size - 4FT X 8FT, 4FT X 4FT
Thickness - 2MM TO 150MM
Colour - Green
FR4 COPPER CLAD LAMINATED SHEET
FR4 Copper Clad Laminate is a sort of copper foil secured laminated board shaped through warmth squeezing after the electric industry antacid free glass fiber dips into thermoset epoxy resins and is secured with copper foil at one side or both sides.
Thickness - 0.2MM TO 2MM
Size - 1MTR X 2MTR, 4FT X 8FT
FR4 PARTS
FR4 is rightly the most used material in PCB construction. Boards made from FR4 are strong, water resistant, and provide good insulation between copper layers that minimizes interference and supports good signal integrity.
Size - As Per Required
GLASS EPOXY SHEET
FiberGlass epoxy sheet is a popular and versatile high-pressure thermoset plastic laminate grade with good strength to weight ratios. With near zero water absorption, Fiber Glass Epoxy is most commonly used as an electrical insulator possessing considerable mechanical strength.
Size - 1MTR X 2MTR, 8FT X 4FT & 40” X 48”
Thickness - 0.5MM TO 50MM
Colour - Yellow
BAKELITE SHEET
Bakelite is suitable for use in transformer oil, in machineries, motors and electric appliances where insulating pieces and parts of high mechanical property are required. Bakelite sheet is a hard, dense material made by applying heat and pressure to layers of paper or glass cloth impregnated with phenolic resin.
Size - 4FT X 8FT & 4FT X 4FT
Thickness - 0.5MM TO 50MM
Colour - Dark Brown
FABRIC ROD
These Fiber Phenolic Rods are intended for Fabrications of Mechanical components such as spacers, washers, etc. it is not recommended for Primary insulation for Electrical application involving commercial power frequencies at voltage about 600 volts Material is resistant to dilute solutions of most acids.
Size - 1MTR
Thickness - 6MM TO 200MM
Colour - Brown
GLASS EPOXY ROD
Shop for G10/FR-4 Glass Epoxy rods. G10/FR-4 glass epoxy rod is a composite material that consists of glass fabric, electrical grade epoxy resin. The material is extremely strong and stiff, has a low coefficient of thermal expansion, and outstanding electrical properties.
Size - 1MTR
Dia - 6MM TO 200MM
Colour - Green
HYLAM FABRIC SHEET
Hylam sheets are used where mechanical strength, wear resistance and resilience are more important than electrical insulation. Typical applications of fabric laminates are gears, textiles shuttles, bearings, pickers, bushes and marine application.
Size - 4FT X 8FT & 4FT X 4FT
Thickness - 0.5MM TO 100MM
Colour - Brown